Super anchors
Areas of use:
Overhead line construction, scaffolding, wind measurement towers, wind turbines, ...
Applications:
- Suitable for permanent and also temporary anchoring
- For undisturbed soil, except for rocky soil and bedrock
- The anchor can be screwed in mechanically using the square shaft welded to the eyelet (80x80 mm)
Holding strength:
32 - 117 kN, depending on the type of soil, screw-in depth and disc diameter --> Holding strength table
Super anchors
Standard version: with spiral-shaped disc
| Length | Shaft Ø | Disc | Version | Surface | Item no. | kg/piece |
| 1800 | 50 | 350x10 | smooth | hot-dip galvanised | 1-326 super anchor 1800 / 350x10 / 50 | 35,22 |
The upper end of the shaft has two holes (Ø 24 mm) for hexagon screws. The lower end of the shaft is twisted to form a point. The winding disc (slanted at the front edge) is welded to the shaft on both sides.
Connecting sleeves between the screw anchor and eyelet
| Length | Shaft Ø | Version | Surface | Item no. | kg/piece |
| 220 | 70x10 | smooth | hot-dip galvanised | 1-450 connecting sleeve 220 / 70x10 / LA | 2,90 |
| 500 | 70x10 | smooth | hot-dip galvanised | 1-456 connecting sleeve 500 / 70x10 / LA | 7,10 |
The connecting sleeve is made out of steel piping with two holes (Ø 24 mm) for hexagon screws at both the upper and lower ends of the shaft. A connecting sleeve (500 mm long) is used if the anchor shaft needs to be additionally strengthened. This sleeve has 4 holes (Ø 24 mm) for hexagon screws at the upper end of the shaft.
Extension rods
| Length | Shaft Ø | Version | Surface | Item no. | kg/piece |
| 500 | 70x10 | smooth | hot-dip galvanised | 1-465 extension rod 500 / 70x10 | 8,60 |
| 1000 | 70x10 | smooth | hot-dip galvanised | 1-466 extension rod 1000 / 70x10 | 14,50 |
| 1500 | 70x10 | smooth | hot-dip galvanised | 1-469 extension rod 1500 / 70x10 | 20,30 |
The extension rod is made out of steel piping with two holes (Ø 24 mm) for hexagon screws at both the upper and lower ends of the shaft.
Connecting piece for extension rods
| Length | Shaft Ø | Version | Surface | Item no. | kg/piece |
| 190 | 50 | smooth | hot-dip galvanised | 1-460 connecting piece 190 / 50 | 2,20 |
The connecting piece is made out of round steel with 4 holes (Ø 24 mm) for hexagon screws.
Anchor eyelet
| Length | Shaft Ø | Square | Version | Surface | Item no. | kg/piece |
| 315 | 50 | 80x80 | smooth | hot-dip galvanised | 1-455 anchor eyelet 315 / 80x80 / 50 | 4,50 |
The anchor eyelet is made out of round steel with 2 holes (Ø 24 mm) for hexagon screws.
Accessory
| Description | Ø | Surface | Item no. | kg/piece |
| Hexagon screw, DIN 931 | 22x85 mm | galvanised | 5-420 hexagon screw M22x85 |
0,326 |
| Hexagon nut , DIN 936 | 22 | galvanised | 5-420 hexagon nut M22x85 (total: 4 pcs) |
0,04 |
Request product online