Hop anchors

Areas of use:

Hop growing, anti-hail nets, orchards, tree anchoring, etc.

Applications:

-  Permanent or temporary anchoring in all types of undisturbed soil, except for rocky soil and bedrock
-  The anchor can be screwed in mechanically at the eyelet
-  The anchor can be screwed in manually by inserting a rod through the eyelet

Holding strength:

20 - 80 kN, depending on the type of soil, screw-in depth and disc diameter  --> Holding strength table

The smaller the disc, the lower the extraction force.

Ordering specifications:

Please note: All hop anchors are normally untreated and have an open eyelet!

Please provide us with your specifications if you require a different version.
Special lengths are also available at any time.

Standard version:  With a spiral-shaped disc (for the disc design, also see “Technical information”/winding discs)

Please indicate the following when ordering:
-  The desired surface coating (untreated, painted, galvanised)
-  The design of the eyelet (open, closed)

 


 

Hop anchors 1-347 - Disc Ø = 200 x 4,0 mm

Length Shaft Ø Disc Eyelet Version Surface Item no. kg/piece
1500 25 200x4 open
Ø internal=80
ribbed untreated 1-347 BS hop anchor 1500/200x4/25/R 7,54
1800 25 200x4 open
Ø internal=80
ribbed untreated 1-347 BS hop anchor 1800/200x4/25/R 9,14
2000 25 200x4 open
Ø internal=80
ribbed untreated 1-347 BS hop anchor 2000/200x4/25/R 9,94
2200 25 200x4 open
Ø internal=80
ribbed untreated 1-347 BS hop anchor 2200/200x4/25/R 10,74

Hop anchors 1-348 - disc Ø = 250 x 5.0 mm

Length Shaft Ø Disc Eyelet Version Surface Item no. kg/piece
1500 25 250x5 open
Ø internal=80
ribbed untreated 1-348 BS hop anchor 1500/250x5/25/R 8,28
1800 25 250x5 open
Ø internal=80
ribbed untreated 1-348 BS hop anchor 1800/250x5/25/R 9,44
2000 25 250x5 open
Ø internal=80
ribbed untreated 1-348 BS hop anchor 2000/250x5/25/R 10,2
2200 25 250x5 open
Ø internal=80
ribbed untreated 1-348 BS hop anchor 2200/250x5/25/R 11,0

Hop anchors 1-350 - disc Ø = 250 x 6.0 mm

Length Shaft Ø Disc Eyelet Version Surface Item no. kg/piece
1800 25 250x6 open
Ø internal=80
ribbed untreated 1-350 BS hop anchor 1800/250x6/25/R 9,59

Hop anchors 1-362 - disc Ø = 400 x 8.0 mm

Length Shaft Ø Disc Eyelet Version Surface Item no. kg/piece
1500 28 400x8 open
Ø internal=80
ribbed untreated 1-362 BS hop anchor 1500/400x8/28/R 12,63

 

               
               

Accessories for connection with a wire rope

Description
Width (b) Groove width (c) Length Version Item no. kg/piece
Shaft clip (thimble 70 S, DIN 43154) for Ø 18, 20, 24 mm anchors 40 11 65 hot-dip galvanised 5-194 shaft clip 70 S 0,09
Shaft clip (thimble) for Ø 30, 35 mm anchors 54 20 80 hot-dip galvanised 5-190 shaft clip 0,29

Online request