Super anchors

Areas of use:

Overhead line construction, scaffolding, wind measurement towers, wind turbines, ...

Applications:

-  Suitable for permanent and also temporary anchoring
-  For undisturbed soil, except for rocky soil and bedrock
-  The anchor can be screwed in mechanically using the square shaft welded to the eyelet (80x80 mm)

Holding strength:

32 - 117 kN, depending on the type of soil, screw-in depth and disc diameter --> Holding strength table

Super anchors

Standard version: with spiral-shaped disc

Length Shaft Ø Disc Version Surface Item no. kg/piece
1800 50 350x10 smooth hot-dip galvanised 1-326 super anchor 1800 / 350x10 / 50 35,22

The upper end of the shaft has two holes (Ø 24 mm) for hexagon screws. The lower end of the shaft is twisted to form a point. The winding disc (slanted at the front edge) is welded to the shaft on both sides.

Connecting sleeves between the screw anchor and eyelet

Length Shaft Ø Version Surface Item no. kg/piece
220 70x10 smooth hot-dip galvanised 1-450 connecting sleeve 220 / 70x10 / LA 2,90
500 70x10 smooth hot-dip galvanised 1-456 connecting sleeve 500 / 70x10 / LA 7,10

The connecting sleeve is made out of steel piping with two holes (Ø 24 mm) for hexagon screws at both the upper and lower ends of the shaft. A connecting sleeve (500 mm long) is used if the anchor shaft needs to be additionally strengthened. This sleeve has 4 holes (Ø 24 mm) for hexagon screws at the upper end of the shaft.

Extension rods

Length Shaft Ø Version Surface Item no. kg/piece
500 70x10 smooth hot-dip galvanised 1-465 extension rod 500 / 70x10 8,60
1000 70x10 smooth hot-dip galvanised 1-466 extension rod 1000 / 70x10 14,50
1500 70x10 smooth hot-dip galvanised 1-469 extension rod 1500 / 70x10 20,30

The extension rod is made out of steel piping with two holes (Ø 24 mm) for hexagon screws at both the upper and lower ends of the shaft.

Connecting piece for extension rods

Length Shaft Ø Version Surface Item no. kg/piece
190 50 smooth hot-dip galvanised 1-460 connecting piece 190 / 50 2,20

The connecting piece is made out of round steel with 4 holes (Ø 24 mm) for hexagon screws.

Anchor eyelet

Length Shaft Ø Square Version Surface Item no. kg/piece
315 50 80x80 smooth hot-dip galvanised 1-455 anchor eyelet 315 / 80x80 / 50 4,50

The anchor eyelet is made out of round steel with 2 holes (Ø 24 mm) for hexagon screws.

Accessory

Description Ø Surface Item no. kg/piece
Hexagon screw, DIN 931 22x85 mm galvanised 5-420 hexagon screw
M22x85 
0,326
Hexagon nut , DIN 936 22 galvanised 5-420 hexagon nut
M22x85  (total: 4 pcs)
0,04

product request